Regular Spangle Galvanized Steel for Garage Doors
Quick Details
| Standard: | ASTM, DIN, JIS | Grade: | A591, ST1203, G3313 | Thickness: | 0.25 ~ 2.40 |
| Type: | Steel Coil | Technique: | Cold Rolled | Surface Treatment: | Galvanized |
| Application: | Container Plate | Special Use: | High-strength Steel Plate | Width: | 20mm ~ 1524mm |
| Length: | As your requirement (Sheet & Coil) | Electro Galvanized Steel Sheet: | egi | Electro Galvanized Steel Sheet & Coil: | egi |
PRODUCT FEATURES
Formability - Unlike Hot-Dipped Galvanized Steel, the base metal of the Electro-Galvanized Steel
is less affected by the heat and therefore, it is able to retain its formability.
Paintability - Free from any spangles and pin-holes, the Electro-Galvanized Steel has a flawless
surface that is most ideal for any type of painting.
Corrosion Resistance - The EGI's evenly coated zinc enhances its resistance to any type of corrosion.
(Additional surface treatments are available for further enhancement of corrosion resistance.)
Weldability - Among all coated steel, the EGI has the highest weldability due to minimum
amount of zinc being coated.
.Application of hexavalent chromium alternative material
- Develop trivalent chromium, a stable material, as the main component
(Add etching agent, reducing agent, level agent, etc.) : Cr-free, non-toxic chromate
- Superior corrosion resistance: secure same corrosion resistance level of existing products
.Environment-friendly products
- Environment-friendly products harmless to humans and environmental pollution preventive
- Actively corresponds to environmental regulations of Europe and other leading countries
Specification & Available size range
| Item | Figure | Coating | Quality | Surface |
| Thickness | 0.25 ~ 2.4mm | 05/05 G/SQ MTR | SECC | PHOSPHATED |
| Width | 600~ 1,524mm | 10/10 G/SQ MTR | SECD | CHROMATED / CHROME FREE |
| Sheet Length | 600 ~ 5,000mm | 20/20 G/SQ MTR | SPEC | OILED |
| Coil Inner Diameter | 508 / 610 mm | 30/30 G/SQ MTR | SECEN | ANTI FINGER |
An order of inquiry should be accompanied by the following information.
1. Size : Thickness / Width / Length ( in case of Cut Lengths).
2. Specification requirement : Coating designation or Wt / Type of coating & surface treatment
Coil I.D / Packing Weight.
3. Quantity.
4. Intended use
5. Packing and marking requirement.
6. Delivery Requirement.
7. Required inspection, if other than mill inspection.
8. Other pertinent information.
Picture:
