aluminum strips for transformer
alloy: 1050/1060 3003/8011
Thickness range: 0.15 to 0.6mm
Surface finish: washed by chemical water
Bright and smooth surface, without flow lines
Quality of material: totally free from defects like white rust, oil patches, roll marks, edge damage, camber, dents, holes, break lines, scratches and free from coil set
aluminum coil/strip for PEX-AL-PEX pipedata:
Dimension(MM) | 0.20*49*C; 0.23*61.7*C 0.28*77*C; 0.35*99*C | Alloy and Temper | 8011 0 | Product | aluminum coil/strip | ||||||
Techuique Standard | YS/T 434-2000 | ||||||||||
Chemical Composition(%) | |||||||||||
Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other | Al ≥ | ||
| |||||||||||
0.50~0.9 | 0.6~1.0 | 0.1 | 0.2 | 0.05 | 0.05 | 0.1 | 0.08 | - | remainder | ||
| |||||||||||
Notice: Aluminum foil not contains Pb,As and other Virose elements. | |||||||||||
Mechanical Property | |||||||||||
Temper | THICKNESS | Strength(Mpa) | Elongation(%) | | |||||||
0 | 0.20mm; 0.23mm; 0.28mm; 0.35mm | 100~120 | 20% | |
Advantage:
1. Good quality,low price.
2. Short delivery time
3. Welding: Not allowed
4. Windings: No excessive run out of windings
5. Form of winding on coil:No ovalisation allowed
6. Camber: Aiming value ≤ 1mm/2.5m, Demand ≤ 2mm/2m
7. No Bur on Side edge
8. No wave on side
9. No oil stains,no wrinkle, on surface
10. Corrosion Resistant